Agilex eSOM7 Carrier Module for ADI Apollo (AD9084) MxFE Development

00069_Apollo_Side_View_300_DPI

Overview

Carrier module to be paired with eSOM7. Designed to enable end-to-end Wideband Wireless and Satellite-Hub developments with latest ADI Apollo MxFE Devkit. Supports interchangeable eSOMs with different Agilex devices and supports FPGAs with 4 or 2 F-Tiles.

Features

  • Compact 200 x 215mm (7.87” x 8.46”) carrier for Agilex eSOM7 FPGA module designed specifically to interface with ADI Apollo MxFE devkits
  • Supports interchangeable eSOMs with different Agilex devices; primarily designed for Agilex 7 I/F series 027/022 density SOMs with 4x F-Tiles
  • Designed to provide End-to-End connectivity for broadband wireless development with high bandwidth networking interfaces up to 400Gbps
  • Apollo MxFE devkit compatible VITA57.4 FMC+ connector with:
    • 24 Serdes lanes up to 32 Gbps for JESD204C connectivity; 2 group of 12 lanes
    • JESD clocks and SYSREF signals mapped to FPGA’s true LVDS IOs
    • Control, configuration and I/O with level translation mapped through Max10 CPLD on carrier for Apollo devkit
  • 1 x QSFP-DD connector for networking interface with 400G/200G/100G Ethernet using F-tile hard IP
  • x4 Gen4 (16Gbps) PCIe Gen4 interface through MCIO connector (shared with network F-Tile)
  • Up to x16 Gen4 (16Gbps) PCIe Gen4 interface through to MCIO connectors (dedicated mapping to F-Tile)
  • 50-pin connector for network synchronizer and interface expansion modules
    • Signals mapped to eSOM HPS to support SPI, I2C and UART interfaces
    • Differential clock and synchronization signals to support PTP/1588 and SYNCE based network synchronization including JESD 204B/C clock generation
  • Integrated USB Blaster II debug interface through micro-USB connector
  • Processor and debug interfaces
    • HPS Ethernet 1000Base-T via RJ45 connector
    • HPS UART and BMC I2C to the USB2.0 connector via USB to UART+I2C bridge
    • HPS I2C to the carrier I2C expansion switch and carrier CPLD
    • HPS mater SPI to the carrier CPLD with support for FMC+ SPI expansion
  • 6-pin ATX and 4-DIN connector for flexible +12V power input
Intel_Titanium_Partner