FPGA / SOC Development Boards
High performance FPGA based development boards and platforms for proof of concept and deployment in your next product. We have experience in delivering production ready, high volume hardware, with automated production tests to provide high quality boards. Verified Board Support Packages (BSP) are also available with each board for quick time to market.
Intel FPGA Boards
HiPrAcc™ CS200D
Dual Agilex Computational Storage Module
- Two Intel Agilex 7 F-Series: 027
- 2 banks of 64-bit DDR4 memory (8GB/16GB) per FPGA
- PCIe Gen4 switch interconnect for the two FPGA nodes, 8x Gen4 M.2 NVMe SSDs and x16 Gen4 host PCIe edge connector
- Support for up to eight on-board Gen4 M.2 NVMe SSDs
HiPrAcc™ NCS200
Agilex Network Computational Storage 200G
- Intel Agilex 7 F-Series: 027, 023, 022 or 019
- Up to 2 banks of 72-bit Fabric DDR4 DIMM(s)
- 40-bit HPS DDR4 (Chip-down; 2/4/8GB)
- E-Tile based dual QSFP-DD interfaces (4x 100G/50G/40G or 16x 25G/10G)
- P-Tile based PCIe Gen4 x16 host interface (Edge Connector)
- Up to four Gen4 M.2 NVMe SSDs
HiPrAcc™ NC200
Intel Agilex Low Profile PCIe Card
- Intel Agilex 7 F-Series: 027/022, 023/019, 014/012, 008/002
- Up to 3 banks of 72-bit DDR4 (Chip-down; 12GB/24GB)
- F-Tile based QSFP-DD interface (Up to 400Gbps)
- F-Tile based PCIe Gen4 x16 host interface (Edge Connector)
HiPrAcc™ NC100
Intel Agilex Low Profile PCIe Card
- Intel Agilex 7 F-Series: 014, 012
- Up to 3 banks of 64-bit DDR4 memory (12GB/24GB)
- E-Tile based QSFP interface (Up to 200Gbps)
- P-Tile based PCIe Gen4 x16 host interface (Edge Connector)
Intel Agilex Embedded SOM (eSOM7-2F)
- Supported Agilex 7 F-Series FPGAs: 027/022 and 014/012
- 32x FGT transceivers (32Gbps NRZ/58Gbps PAM4)
- Single-ends, differential/LVDS and control peripheral I/Os
- Up to 3 banks of 72-bit chip-down DDR4 (12GB/24GB)
- ARM A53 processing complex (HPS) with DDR4, eMMC/µSD, GiGE Ethernet, SPI, I2C and UART interfaces
Intel Agilex System on Module (SOM)
- Intel 10nm Agilex AG014 FPGA with P-Tile and
E-Tile transceivers - 16 transceivers with up to 28.9Gbps NRZ or 8 up to 57.8Gbps PAM4
- P-Tile based x8 Gen4 PCIe interface
- Complete Linux FPGA support package available
- Rich suite of hardware-verified Ethernet IP cores available
- Breakout carrier boards available for development
Intel Stratix 10 SX Soc Dual FMC+ Development Platform
- Intel S10 SX SoC FPGA (with H-Tile Transceivers)
- Signal Processing and wireless communications centric design
- Dual FMC plus mezzanine slots for application scalability and flexibility
- Compact 8.15” x 8.4” module
- Complete FPGA support package available
- Rich suite of Ethernet IP cores available
- Available as integrated 19” half width, 1U, 300mm deep standalone SoC FPGA device
Intel Stratix 10 AMC Module
- Compliant with AMC.0 Rev 2.0, single-width, mid-size module specifications
- Device support –L and –VID Sx280, S210, Sx165, Sx110 and Sx085 SoCs
- Signal Processing and wireless communications centric design
- Single Vita 57.1 FMC mezzanine slot for application scalability and flexibility
- PICMG compliant AMC MMC controller with support for FRU information, multiple sensors and HPM.1 upgrade.
- Analog Devices AD9545 and Silabs Si5344 based low jitter clock synchronizer/synthesizer
Don't see what you're looking for?
Contact us and we can customize the boards to your needs.